-Single Kayak Trailer
also for Canoes, small boats, dories, and skiffs up to 200 lbs
Trailex Ultra-Light Aluminum Trailers
come with a One Year Limited Warranty. Almost 50% lighter
than steel trailers and they Never Rust
FREE SHIPPING
ON TRAILEX SUT SERIES TRAILERS*
*within the 48 USA
Trailex Model
SUT-220-S Trailer
The Trailex SUT-220-S Trailer Provides A Soft Ride for Even Small
Kayaks
not included - Old Town Loon Kayak (previous
generation trailer shown - current model has improved box style suspension)
The SUT-220-S is so
light, it is often used also as a launching dolly
All Aluminum, All Bolted Construction, All
Adjustable
SUT-220-S Trailer
is 1799.00 + FREE Shipping
(48 USA)
Standard Leaf Assembly & Standard Wheels
Scroll Down the Page for
Details , Available Options Pricing and Action Videos
Watch a Video on the SUT-220-S Features
Go from This
To This
Model SUT-220-S will transport a single Kayak
or Canoe . It has a tuned suspension to virtually
eliminate "Road Bounce" on Kayaks, Canoes, and other small boats. This
trailer can be shipped via UPS, and is easily assembled. Since the SUT-220-S Trailer is made of aluminum, it is
maintenance-free in addition to being strong and lightweight. Another
advantage is that the SUT-220 carries your Kayak or Canoe upright, allowing you
to store gear in the boat and since the kayak or canoe is positioned for
launching, you may never have to lift your boat again.
16 Foot " Kajak" Sport Viking Expedition kayak on Trailex Trailer
(previous generation trailer shown - current model
has improved box style suspension)
Trailex Model SUT-220-S with optional spare tire and carrier
( not included -Old Town Loon Kayak shown on trailer or
trailer stand)
Trailex SUT-220-S Has Cradles That Swivel To Accommodate A Wide Variety of
Kayaks & Boats From Flat Bottomed Canoes To Dories Like The MiddlePath Skua
(not included)
Shown Above (previous generation trailer shown - current model
has improved box style suspension)
Kit includes Set of Two
48" X 6" Rear Bunks and Hardware to Replace
Rear Cradle.*
259.00
* NOTE:
Rear Cradle must be removed when installing the RB-KIT.
The trailer is designed only for a two point support system.
Bearing Protection System
Included on Every Trailer
Sure Lube low pressure bearing lubrication system. Protects bearings and prevents
any seal damage.
Easy to use. A Zerk Fitting is located under the axle's end cap. Removing the end cap allows you to use a
small grease gun to lubricate the bearings.
The new grease pushes the old grease out.
Trailex Trailers Are Rated For All US Highway Speeds.
This Trailex Canoe Trailer Shown Above Has Traveled 16,000 Miles in one year.
RB-KIT
Optional
Rear Support Bunks
Bunks can be Adjusted in
Height and Angle, or Spaced Close or Wide
Support Bunks can be Flat
Angle Bunks to fit Hull Contour
For illustrative purposes :similar Trailex trailer shown
set up with front cradle and rear bunks
Trailer comes standard with a
Front and Rear Cradle. This option allows you to remove the Rear Cradle
and install Dual longitudinal bunks. RB-KIT is a Set of
Two 48" X 6" Bunks. NOTE:
Rear Cradle must be removed when installing this kit. The trailer is
designed only for a two point support system.
Cradles on SUT-220-S will allow bunks to be adjusted inward to accommodate
narrow boat hulls, such as kayaks.
Semi Vee Hulls
Adjusts to any Hull
Swivels Flat
Trailer Cradles Adjust to any Point on the
Tongue - Bunks Swivel to Hulls Contour
Application Information
The Trailex Model SUT-220-S will carry up to a 17' long Canoe, Kayak, Skiff or Dory*
* most states allow up to a 4' overhang
before requiring flags or reflectors
